Wireless & Wi-Fi 6E / 7
Enterprise wireless engineered for coverage, capacity and roaming.
Jiva Technologies consults, surveys, designs, deploys, integrates, optimises and supports enterprise Wi-Fi 6, Wi-Fi 6E and Wi-Fi 7 — including WPA3-Enterprise, 802.1X, NAC, high-density and warehouse deployments, guest / BYOD / IoT segmentation and cloud-managed controllers, with post-install heat-map validation before handover.
Predictive design plus on-site validation before acceptance.
WPA3-Enterprise, 802.1X, NAC and per-role segmentation.
Meraki, Aruba Central, Juniper Mist, Extreme and Ruckus.
What we deliver
Wi-Fi 7 & Wi-Fi 6E Deployments
802.11be and 802.11ax design covering 6 GHz, 320 MHz channels and Multi-Link Operation (MLO) for wireless-first offices, AR / VR and greenfield builds — with client-fleet compatibility mapping, capacity modelling and refresh planning before specification.
RF Site Surveys & Predictive Design
Predictive designs in Ekahau or Hamina against CAD floor plans and building materials, sized for capacity and roaming — not just coverage — so access-point count, placement and cabling are engineered against the real client and application load.
Heat Mapping & Post-Install Validation
On-site active and passive surveys after deployment — signal, SNR, throughput, roaming and interference measured against the design specification, with a signed heat-map report before handover and acceptance.
High-Density & Warehouse Design
Stadium, campus, distribution-centre and warehouse designs tuned for hundreds of clients per access point and long-range coverage — capacity-planned with cell sizing, antenna selection and channel planning validated on site.
Wireless Security (WPA3, 802.1X, NAC)
WPA3-Enterprise, 802.1X authentication and Network Access Control with Cisco ISE, HPE Aruba ClearPass or FortiNAC — enforcing device posture, dynamic segmentation and role-based access across corporate, guest and IoT SSIDs.
Guest, BYOD & IoT Segmentation
Per-SSID and per-role segmentation with PPSK, dynamic VLANs and captive portals — isolating corporate, guest, BYOD and IoT / OT devices on the same physical infrastructure and mapping cleanly into firewall and SASE policy.
Cloud-Managed Wireless Platforms
HPE Aruba Central, Juniper Mist AI, Cisco Meraki and Catalyst Wireless, Extreme Networks and Ruckus — deployed for single-pane operations, AI-driven RF optimisation, zero-touch provisioning and telemetry-rich analytics.
Wireless Lifecycle & Managed Operations
Consulting, design, deployment, integration, RF optimisation, firmware lifecycle, troubleshooting and NOC-managed operations under an agreed service schedule — with scheduled performance reviews as client fleets, floor plans and applications evolve.
Why teams call us
- Coverage is unmapped and inconsistent
Existing wireless was installed to a coverage rule of thumb rather than a survey, leaving dead spots, roaming gaps and inconsistent client experience across floors and buildings.
- Capacity fails under real client load
AP counts and channel plans were sized for coverage, not for concurrent users on video, softphone and cloud applications — so performance degrades under normal working conditions.
- Security policy is fragmented across SSIDs
Corporate, guest, BYOD, IoT and OT devices share overlapping networks, with inconsistent 802.1X, NAC and segmentation between sites.
- No evidence the design was met
Handover included no post-install survey, so there is no baseline of signal, SNR, throughput or roaming to compare against future changes or vendor claims.
Our approach
A survey-driven wireless lifecycle covering predictive design, deployment, on-site validation and ongoing support tuned to real client and application load.
- Assess
Review site plans, client mix, applications, existing controllers, IDF cabling and current wireless behaviour, incident history and refresh drivers.
- Design
Produce a predictive RF design in Ekahau or Hamina with capacity model, AP placement, antenna choice, channel and power plan and a security architecture.
- Deploy & Validate
Install cabling, mount and configure access points, integrate identity and NAC, then run on-site heat-map and roaming validation against the design specification.
- Optimise & Support
Tune RF, firmware, roaming and segmentation over time and support the wireless estate under an agreed schedule with scheduled reviews and change coordination.
End-to-End IT Integration and Support
From assessment and solution design through implementation, remediation, ongoing support, and lifecycle optimization.
- ConsultAssess Coverage, Capacity & Clients
- DesignPredictive RF & Security Design
- SupplyAccess Points, Controllers & Cabling
- ImplementInstall, Configure & Integrate
- RemediateCorrect RF, Roaming & Segmentation
- ModernizeRefresh to Wi-Fi 6E / Wi-Fi 7
- MaintainFirmware, RF Health & Reviews
- ManageOperations & Change Coordination
- ConsultAssess Coverage, Capacity & Clients
- DesignPredictive RF & Security Design
- SupplyAccess Points, Controllers & Cabling
- ImplementInstall, Configure & Integrate
- RemediateCorrect RF, Roaming & Segmentation
- ModernizeRefresh to Wi-Fi 6E / Wi-Fi 7
- MaintainFirmware, RF Health & Reviews
- ManageOperations & Change Coordination
Fix What's Broken — Remediation Sprints
Wi-Fi dead zones, WAN performance issues, SD-WAN policy drift, or a network you can't see into during incidents? We run fixed-scope networking remediation sprints against a defined outcome.
- LAN/WLAN survey, controller tuning and coverage/roaming fixes
- SD-WAN, MPLS and internet-breakout policy cleanup and QoS tuning
- Observability rollout: flow, telemetry, path-analytics and alert hygiene
Support & Maintenance — AMC-Backed
Keep the network reliable after go-live — firmware, controller hygiene, ISP coordination and vendor-TAC escalation under a Jiva AMC or managed connectivity service.
- L1/L2/L3 support for LAN, Wi-Fi, WAN, SD-WAN and network observability platforms
- Preventive maintenance, firmware and ISP/carrier coordination with SLAs
- Vendor-TAC escalation, licence renewal and network lifecycle refresh
Continue exploring
Related services
- Networking & Connectivity
Align LAN, WAN, wireless, secure edge, resilient connectivity, and observability within one multi-vendor enterprise networking programme.
- LAN, WAN, SD-WAN & Managed Connectivity
Design, deploy, and support enterprise routing, switching, spine-leaf data-centre fabrics, and application-aware SD-WAN overlays across every site and cloud region.
- SASE, SSE, ZTNA & Secure VPN
Identity-aware secure access converging SASE, SSE, ZTNA, CASB, SWG, FWaaS, and IPsec / SSL VPN with Microsoft Entra ID, Okta, or Duo.
- Network Monitoring & Observability
SNMP, Syslog, NetFlow / IPFIX, streaming telemetry, packet capture, synthetic monitoring, Digital Experience Monitoring, and AIOps correlation with executive dashboards.
- Network Security
Next-generation firewalls, segmentation, intrusion prevention, and secure-edge controls aligned with the connectivity fabric and identity policy.
- Identity & Access Management
Federated identity, single sign-on, multi-factor authentication, and conditional access — the authoritative identity layer for SASE, ZTNA, and secure remote access.
Engineer enterprise wireless
Deliver wireless that meets its design specification
Review current coverage, capacity, security posture and roaming experience across every site. Jiva Technologies can survey, design, deploy, integrate, remediate and support a Wi-Fi 6E or Wi-Fi 7 estate with signed heat-map validation and scheduled performance reviews.
